150 Pool Test Strips

This comprehensive pool water tester takes the guesswork out of pool chemistry by scanning 7 critical parameters instantly to catch hidden imbalances before they cause burning eyes, itchy skin, or cloudy water:

• Sanitization: Free Chlorine, Total Chlorine, and Bromine.
• Water Balance: pH and Total Alkalinity.
• Pool Protection: Cyanuric Acid (stabilizer) and Total Hardness.

To use the Danny’s Pool Products 7-in-1 Pool & Spa Test Strips, submerge a single strip in your pool or hot tub water for 2 seconds, remove it face-up without shaking off excess water, and hold it horizontally for 15 seconds. Finally, compare the colored pads to the color chart on the bottle to read your results.

Here is the exact step-by-step process for accurate water testing:

• Step 1: Collect a Water Sample - Use the included dedicated testing vial to scoop water from your pool or spa. For the most accurate reading, take the sample from a depth of about 12 to 18 inches below the surface, away from any return jets.
• Step 2: Dip the Strip - Remove one test strip from its moisture-blocking aluminum sealed pack. Dip the strip completely into the water sample for exactly 2 seconds.
• Step 3: Hold Horizontally - Remove the strip from the water with the pads facing upward. Do not shake excess water off the strip, as this can cause the chemical reagents to bleed into adjacent pads. Hold it completely still and horizontal for 15 seconds.
• Step 4: Match and Read Results - Immediately hold the strip against the color-coded chart on the bottle. Match the colors of the pads to determine your levels for Total Hardness, Free Chlorine, Bromine, Total Chlorine, Cyanuric Acid, Total Alkalinity, and pH.

Pro Tip: Always keep the bottle cap tightly closed between uses and only open the airtight aluminum pouches when you are ready to test to prevent humidity from spoiling the remaining chemical test strips.

Yes, you can use the Danny’s Pool Test Strips for your hot tub or spa! These versatile pool water test strips are formulated and ideal for all residential water testing needs. Whether you need hot tub test strips, jacuzzi maintenance, or above-ground and in-ground swimming pool testing, a single strip gives you a complete, accurate water profile in seconds.

For a safe and crystal-clear swim, the recommended frequency is to test pool water 2–3 times a week. With 150 high-quality pieces in one box, this kit provides a full-season supply that will easily cover your entire summer across your pool, spa, or hot tub with zero need for mid-season reorders.

Yes, the Danny’s Pool Products 7-in-1 Kit tests for both Free Chlorine and Bromine on the exact same strip, making it the perfect all-in-one tester for both traditional chlorine pools and bromine-based hot tubs or spas.

Because hot tubs operate at much higher temperatures than pools, many spa owners prefer Bromine because it remains stable and sanitizes longer in hot water. When reading your results:

• For Chlorine Pools: Look at the Free Chlorine (FC) and Total Chlorine (TC) pads on the color chart to ensure your pool is properly sanitized.
• For Bromine Hot Tubs/Spas: Look at the dedicated Bromine (Br) pad on the color chart. You do not need to buy a separate specialty spa kit - this single strip gives you an instant, accurate profile for whichever sanitizer you use.